How To Build A Guinea Pig Cage From Scratch? (Household Items)

As you welcome a guinea pig, the first thing that can come to mind is where it’s going to stay. Sure, for the first few hours, it may seem cuddly and respond to your playtime escapades, but at night, when all of your family retreats to their rooms, your guinea pig will also need a home to stay in.

Regular guinea pig cages may seem too small for their liking, especially if they tend to run around as they may hurt themselves along the way, due to the little space.

To prevent this, you can build a custom cage that is suitable for your liking. This can be your only choice, especially if you cannot find your ideal pen at your local pet store. You can have valuable insight into this matter with the information in this article, to build a cage for your fluffy friend!

Types of Guinea Pig Cages

For starters, you would need to know what type of cage you want before you get or make one. With this, you need to know what are the raw materials that are available to be turned into your guinea pig’s home. This gives you an idea of the entire structure, rather than being kept in the dark while attempting to acquire one.

To know the types, here are the following with all the necessary information:

Plastic Cage

It is the most common cage that the pet stores offer as of this time. Plastic cages are primarily made of metal bars and plastic with a lid. Though, one of the common disadvantages of this product is that it tends to be too small for an adult guinea pig, which is why most owners modify it with cage connectors later on.

Also, the floor of these cages is made of wires which means, you will need to put a flat surface to prevent the guinea pigs from getting injured.

Cages with Multilevel Floors

These cages can be made of either metal or plastic. This cage features multiple flat surfaces on different levels and provides a good airflow since most of these cages are often equipped with ventilatory materials. Though, the metal bars ought to be sturdy enough to prevent your pet from falling.

C & C Cage

This type of cage seems like it is required to be made from scratch, or in other terms, a do-it-yourself type of product. It uses a combination of a plastic called coroplast and coated tube wires.

You can decide on the desired size depending on the wire and length of plastic available. Some of its advantages include good air circulation, durability, and affordable costing.


The aquariums made of glass are known to be inexpensive and available anywhere, which means that it may be the most accessible type of them all. Though, often, it is not large enough to house an adult guinea pig and does not provide proper ventilation. The glass can also limit your pet's sense of smell and vision.

Top 3 DIY Guinea Pig Cage

If you are a crafty person, you can always settle with making your adorable pet's little home by yourself. It may seem like a lovely surprise, to show affection as they can deeply appreciate the cage that you will make for him.

To gain knowledge on how to do this, here are some ideas that can get you started:

1. Cozy Cabin (from old furniture)

The process of doing this can be considered cheap, especially if you have old furniture lying around. It is relatively a straightforward process to make, together with the required materials;

  • Old dresser
  • Chicken wire
  • Drain pipe (flexible)
  • Small hinges & Eye screw
  • Wood
  • Clip from a dog leash
  • Bathroom flooring squares
  • Wires used for hanging photographs 

To do this, the first step includes demolition, specifically, remove each drawer. Once done, you shall have an open front with rails on each side, filler beams, and drawers that may seem unassembled.

After that, set up the levels by using the drawers acquired. If you have drawers with different sizes, then the deeper and the larger one will go at the bottom. This can prevent our little pet from escaping, as they can reach certain floors and climb over the edge only to be freed through the bottom.

Remove the front panel. Then, measure and cut the filler beams at the desired length. It specifically needs to fit inside the side walls without needing to screw it. Also, it is advisable to put two at the side and bottom for added support. After this, drill a hole to insert the screw, for the wood to not split or crack.

After this, you should cut a corner of those at the high floors, allowing an opening. When it is done, you shall have a cage with three drawers, with the beam replacing the front panel.

Then, create a ramp using the drain pipe by cutting it in half. For the finishing touch, finish the gate using scraps of wood. After doing so, apply the mesh wire using a square frame. To serve as a lock, you can use the dog clip.

2. Wood House

When choosing to do this, you should be careful in not allowing the urine of your pet to touch the wall and sides.

If ever possible, you can add an extra layer of protection to ensure that it is waterproof, just make sure that the material is guinea pig friendly. To do this project, you will need;

  • Strong adhesive (non-toxic glue)
  • Cutting tools, screws, and sandpaper
  • Wood Scraps

First, cut out the walls and opening according to your desired length. If you are confused about the measurement you can consider 45 by 25 by 20 inches. Know that it depends on one's preference, and mine is composed of two openings, with an attached frame to prevent the possibility of deforming.

To attach the walls, you can cut out 7 by 7 squares and place them on each side of the house, creating a ninety-degree angle to stabilize it.

For a final touch, you would need to add a roof. Cut out wood with a measurement of 24 by 45 and attach it on the ceiling. Also, ensure that there are no opened flap or unglued sides. Keep in mind that the dimension depends on how many will live in it and the design that you want.

Aside from this, you also need a cage that has wire grid sides. Then, place it inside the area, and it can turn into their little hiding place or sleeping haven.

3. C & C Cage (Cube and Coroplast)

Doing this can help you make unique and exciting connections for cages. Aside from its affordable aspect, it can also be multilevel, L shape, or have stands depending on preference. Before you start, you need the following materials;

  • Coroplast Sheet: It is mostly used in making signs and is much like cardboard, but waterproof.
  • Grid cube squares: It comes with plastic connectors, but will not be used in this project. They work great in making perimeters when doing cages; the size should be at least equal to that of a box.
  • Zip ties (medium and large)
  • Cutter & Scissors
  • Duct tape
  • Pencil or used for markings
  • Ruler

The first step is to measure. Two by three cubes is the smallest size that you can choose to start with. Keep in mind that the measurement of cubes means the number of cage cubes that can fit in it and not the standardized size for inches.

Then determine the height; it can be at least seven inches tall. After that, measure the rectangular surface that will make the floor. Also, lay two rows of four cubes and press it.

After the measurement is the perforation of coroplast, if you want to bend it at a ninety-degree angle for sides, you can do so by letting the cutter run through the line template once.

Assemble the base by folding the edges to create sides. To do this, bend the long side at a ninety degrees and overlap against the side that is adjacently connected. Tape it to stabilize.

Connect the grids using zip ties; you would need more of it than you expect. Then, cut the ends of the ties using a cutter or scissors. Assemble and connect it using your envisioned designed that was thought of while planning the dimensions of the cage.

At last, combine the cube squares with the plastic coroplast. Specifically, attach the side of the grid squares to form a rectangle that can fit outside of the coroplast material.


Your guinea pig would need a comfortable new home once you pick it to be your furry friend, but properly assess the pros and cons before choosing the right one for them. Such factors of ventilation, amount of space, and noise affect your little pet’s mood, which is why you need to take this under consideration.

In making your DIY cage, you should make sure that it is sturdy and safe enough before giving it to your little one. Now, make your pet a cozy home for a relaxing and comfortable stay.

Click Here to Leave a Comment Below

Leave a Reply: